The dataset is composed of Ichthyoplankton and zooplankton captured during the ArcticNet cruise aboard the CCGS Amundsen from 2017 to 2019. Three samplers fitted with 200 µm to 500 µm mesh nets were used for zooplankton collection . One was a metallic structure with 4 nets of 1 square meter opening each (2x2 multiple net sampler) for water column integrated sampling pulled vertically over from 10 m above the bottom to the surface to catch mesozooplankton. The other sampler was 2 nets of 1 square meter opening each towed at 10 m depth for 20 minutes at 2 knots to catch ichthyoplankton and macrozooplankton. Finally, a 0.5 square meter opening multinet Hydrobios for stratified sampling into nine layer also hauled vertically from 10 m above the sea bottom to the surface. Zooplankton samples were preserved in a 10% buffered formalin seawater solution and were sieved through 1000 µm and 200 µm sieves for analysis. Ichthyoplankton was identified to the lowest taxonomic level possible, a sub-sample was measured and all larvea were kept in ethanol.

The dataset is composed of adult fish species captured during the ArcticNet cruise aboard the CCGS Amundsen from 2017 to 2019. Pelagic fish were caught with an Isaacs-Kidd Midwater Trawl (IKMT, 9-m2 rectangular mouth aperture with mesh sizes of 11 mm in the first section and 5 mm in the last section). It was deployed from the surface to depths targeting possible aggregation of fish as recorded by the acoustic echosounder from the ship. Demersal and benthic fish were sampled with a bottom beam trawl (3-m2 rectangular aperture with a headline and a footrope of 4.27 m and a cod-end mesh of 9.5 mm) deployed on the seafloor. The pelagic and bottom trawls were towed at ~3 knots for 10 to 20 min. All fish collected by the trawls were measured and identified at least to the family level before freezing at -20°C.

The dataset is composed of raw files (.raw) recorded with a SIMRAD EK60 three-frequency (38, 120, 200 kHz) split-beam echosounder that was operated continuously during the ArcticNet cruise aboard the CCGS Amundsen from 2017 to 2019. To ground-truth the hydroacoustic signal, various sampling techniques were applied throughout the cruise track such as midwater and bottom trawling as well as plankton net deployments.

The CTD data was obtained during leg #0603 of the 2006 ArcticNet scientific cruise. The data were collected from October 28 to November 4, 2006, aboard the CCGS Amundsen. There were 22 casts, associated to 21 oceanographic stations, in the Labrador Sea and its fjords along the Canadian coast. The following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), pH (Sea-Bird SBE-18-I), fluorescence (Seapoint chlorophyll fluorometer), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissiometer), light intensity (PAR; Biospherical Instruments QCP2300) and surface light intensity (sPAR; Biospherical Instruments QCP2200). Quality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.

The CTD data was obtained during leg #0602 of the 2006 ArcticNet scientific cruise. The data were collected from August 22 to 31, 2006, aboard the CCGS Amundsen. There were 9 casts, associated to 6 oceanographic stations, in the Labrador Sea research area. The following parameters were measured: temperature, conductivity and pressure (with a Sea-Bird SBE-9plus), dissolved oxygen (Sea-Bird SBE-43), pH (Sea-Bird SBE-18-I), fluorescence (Seapoint chlorophyll fluorometer), nitrate concentration (Satlantic MBARI-ISUS 5T), transmittance (Wetlabs C-Star transmissiometer), light intensity (PAR; Biospherical Instruments QCP2300) and surface light intensity (sPAR; Biospherical Instruments QCP2200). Quality control procedures were applied to the data. Data are available on the Polar Data Catalogue and at the Marine Environmental Data Service (MEDS) of Fisheries and Oceans Canada.